Disclaimer:
Educational Use Only:
The website links provided are to be used strictly for educational and knowledge-gaining purposes only.
No Misuse:
Do not misuse the links or the information contained therein for any commercial, illegal, or unethical activities.
Respect for Websites and Businesses:
Respect the intellectual property and business interests of the websites and their owners. Do not attempt to alter, copy, or redistribute content without proper authorization.
Acknowledge Value of Knowledge:
Recognize and value the knowledge and resources shared by these websites. Use the information responsibly and ethically.
No Endorsement:
The provision of these links does not imply endorsement of the linked sites, their content, or their products and services. Users are responsible for evaluating the suitability and accuracy of the information.
User Responsibility:
By accessing these links, you agree to use the information at your own risk and to comply with all applicable laws and website terms of use.
- How does an IPv6 client ensure it has a unique address after configuring with SLAAC?
a. Contacts DHCPv6 server via ICMPv6
b. Checks with SLAAC server database
c. Sends ARP message with IPv6 address
d. Sends ICMPv6 Neighbor Solicitation with the address as the target
Answer: ditexamanswers - Which method lets a SLAAC host learn the address of the default gateway?
a. Neighbor advertisements
b. Router advertisements from link router
c. DHCPv6 reply messages
d. DHCPv6 advertise messages
Answer: bitexamanswers - What two methods can be used to generate an interface ID with SLAAC?
a. Random generation
b. DAD
c. Stateful DHCPv6
d. EUI-64
Answer: a, ditexamanswers - After an address is generated and applied using SLAAC, what must the client do before using it?
a. Send DHCPv6 INFORMATION-REQUEST for DNS
b. Send DHCPv6 REQUEST to server
c. Send ICMPv6 Router Solicitation
d. Send ICMPv6 Neighbor Solicitation to ensure uniqueness
Answer: ditexamanswers - Which command sets a router interface as stateful DHCPv6 client?
a. ipv6 enable
b. ipv6 address dhcp
c. ipv6 dhcp server stateful
d. ipv6 address autoconfigure
Answer: bitexamanswers - What message tells IPv6 interfaces to use stateful DHCPv6 for addressing?
a. ICMPv6 Router Advertisement
b. DHCPv6 Reply
c. ICMPv6 Router Solicitation
d. DHCPv6 Advertise
Answer: aitexamanswers - Which destination IP does a DHCPv6 SOLICIT message use to find a DHCPv6 server?
a. FE80::1
b. FF02::2
c. FF02::1:2
d. FF02::1
Answer: citexamanswers - In which alternative to DHCPv6 does a router dynamically provide IPv6 info to hosts?
a. SLAAC
b. EUI-64
c. ICMPv6
d. ARP
Answer: aitexamanswers - Which message does a workstation send after multiple DHCPv6 servers reply to a SOLICIT?
a. DHCPv6 REQUEST
b. DHCPv6 INFORMATION-REQUEST
c. DHCPv6 ADVERTISE
d. DHCPv6 SOLICIT
Answer: bitexamanswers - What process in ICMPv6 verifies an IPv6 address is unique before assigning it?
a. EUI-64
b. SLAAC
c. ARP
d. DAD
Answer: ditexamanswers - Which are two characteristics of the SLAAC method for IPv6 address configuration?
a. Router solicitation from routers
b. Default gateway is link-local address of router interface
c. Requires at least one DHCPv6 server
d. Clients send router advertisement to routers
e. Addressing through ICMPv6
Answer: b, eitexamanswers - After receiving ICMPv6 RA message with M=0 and O=1, what should a client do?
a. Request address from DHCPv6 server
b. Autoconfigure address and contact DHCPv6 for more info
c. Autoconfigure address without contacting DHCPv6
d. Use static config
Answer: bitexamanswers - What does the “ipv6 unicast-routing” command do in DHCPv6 config?
a. Enables DNS service for DHCPv6
b. Enables sending ICMPv6 RA messages
c. Enables stateless DHCPv6 server
d. Enables stateful DHCPv6 server
Answer: bitexamanswers - Which address will a client use as default gateway when using SLAAC?
a. All-routers multicast
b. Global unicast of router interface
c. Link-local address of router interface
d. Unique local address of router interface
Answer: citexamanswers - With router RA A=1, O=1, M=0, what happens as PC configures its IPv6 address?
a. Contacts DHCPv6 for all info
b. Contacts DHCPv6 for prefix, length, unique ID
c. Uses RA info & contacts DHCPv6 for more details
d. Uses RA info only
Answer: citexamanswers - Which method lets hosts auto-assign IPv6 addresses from RA but get DNS from DHCPv6?
a. RA and EUI-64
b. SLAAC
c. Stateful DHCPv6
d. SLAAC and stateless DHCPv6
Answer: ditexamanswers - What is used in EUI-64 to make IPv6 interface ID?
a. Random 64-bit address
b. IPv4 address
c. DHCPv6-provided address
d. MAC address of Ethernet interface
Answer: ditexamanswers - With RA M=1 and A=0, what must clients do for address configuration?
a. Use all info from DHCPv6
b. Use info in RA
c. Use prefix, length from DHCPv6, random interface ID
d. Use prefix from RA, other info from DHCPv6
Answer: aitexamanswers - On routers, which command enables SLAAC when IPv6 GUA is set and interface is up but hosts do not get IPv6 GUA?
a. ipv6 dhcp pool
b. ipv6 unicast-routing
c. ipv6 enable
d. ipv6 nd other-config-flag
Answer: bitexamanswers - With router RA M=0, O=1, what must PC do?
a. Gets all info from DHCPv6
b. Gets prefix, length, and unique ID from DHCPv6
c. Uses RA and contacts DHCPv6 for more info
d. Uses RA info exclusively
Answer: citexamanswers - When using SLAAC, which address is used as the default gateway?
a. Router interface GUA
b. Router link-local address
c. FF02::1 all-nodes multicast
d. FF02::2 all-routers multicast
Answer: bitexamanswers - What does the O flag signify in Router Advertisement?
a. Managed address configuration
b. Other configuration (like DNS)
c. Router supports stateless configuration
d. Indicates host can use SLAAC
Answer: bipcisco+1 - Which IPv6 message helps a host learn network prefix for SLAAC?
a. Neighbor Solicitation
b. Router Advertisement
c. Neighbor Advertisement
d. Router Solicitation
Answer: bipcisco+1 - What protocol does SLAAC use for host configuration?
a. ARP
b. DHCPv4
c. ICMPv6
d. SMTP
Answer: cipcisco+1 - What is the function of Duplicate Address Detection (DAD)?
a. Finds MAC addresses
b. Detects subnet size
c. Checks IPv6 uniqueness
d. Resolves DNS
Answer: cgeeksforgeeks+1 - SLAAC relies on which IPv6 feature for clients to autoconfigure addresses?
a. Neighbor Discovery Protocol
b. DNS
c. TCP
d. HTTP
Answer: ageeksforgeeks+1 - Link-local address is mandatory for?
a. IPv4 hosts
b. Each IPv6-enabled interface
c. DHCPv4 relay agent
d. Switches only
Answer: bgeeksforgeeks - SLAAC stands for?
a. Stateless Address Auto Configuration
b. Static Local Autoconfiguration Control
c. State Local Address Autocomplete
d. Stateless Local Authentication Control
Answer: aipcisco+1 - What is EUI-64 in the context of SLAAC?
a. Routing protocol
b. MAC-to-IPv6 interface ID conversion method
c. Encryption scheme
d. Tunneling method
Answer: bgeeksforgeeks+1 - Which protocol must be enabled on routers for SLAAC to function?
a. RIP
b. IPv6 unicast-routing
c. NAT
d. IPv4 unicast-routing
Answer: bipcisco+1 - What flag combination enables both SLAAC and stateless DHCPv6 (for DNS info only)?
a. M=1, O=0
b. M=0, O=1
c. M=1, O=1
d. M=0, O=0
Answer: bipcisco - What does the M (Managed) flag indicate in IPv6 RA?
a. Host must use stateful DHCPv6
b. Host should use only SLAAC
c. Use a static address
d. Request more info from DHCPv6
Answer: ageeksforgeeks+1 - ICMPv6 Router Advertisements with A=1 allow what?
a. Only DNS via DHCPv6
b. Full SLAAC configuration
c. Only static assignment
d. EUI-64 only
Answer: bgeeksforgeeks - Which address type can never be assigned using SLAAC?
a. Global unicast
b. Link-local
c. Multicast
d. Unique local
Answer: cgeeksforgeeks - When using SLAAC, which two things does the host derive from Router Advertisement?
a. Network prefix
b. MAC address
c. DNS server IP
d. Prefix length
Answer: a, dgeeksforgeeks+1 - Which is a benefit of using SLAAC?
a. Centralized management
b. No server required for IP assignment
c. Always requires user intervention
d. Static manual addressing
Answer: bipcisco+1 - How can a host’s interface ID be generated for SLAAC?
a. Use of MAC address and EUI-64 method
b. Only MAC address
c. Only manually
d. Only assigned by ISP
Answer: aipcisco+1 - How are addresses generated in SLAAC guaranteed to be unique on the subnet?
a. Neighbor solicitation for DAD
b. Central server verification
c. Static rules
d. Broadcast ARP
Answer: ageeksforgeeks+1 - How does SLAAC handle DNS assignment by default?
a. Provided in Router Advertisement
b. Manually assigned only
c. No DNS info by default
d. Always DHCPv6 only
Answer: cgeeksforgeeks - When might SLAAC be combined with stateless DHCPv6?
a. When gateway is unknown
b. When client requires DNS or other options
c. When multiple routers are present
d. For high-priority traffic only
Answer: bgeeksforgeeks+1 - Which item is always configured by SLAAC only?
a. Default gateway
b. DNS server
c. Subnet mask
d. Hostname
Answer: ageeksforgeeks+1 - What ensures that two SLAAC clients on the same network don’t choose the same address?
a. DAD
b. Manual config
c. SNMP
d. DHCP server
Answer: ageeksforgeeks+1 - What triggers a host to send a Router Solicitation (RS)?
a. It needs an IPv6 address or more info
b. It checks for duplicate MACs
c. It wants to join a multicast group
d. Router wants to disconnect the host
Answer: aipcisco+1 - SLAAC is defined in which RFC?
a. RFC 1918
b. RFC 4862
c. RFC 2131
d. RFC 8415
Answer: bdatatracker.ietf+1 - In what scenario would a network admin disable SLAAC?
a. Needs full control over assignments
b. All routers are stateless
c. Only link-local addressing desired
d. When EUI-64 is required
Answer: ageeksforgeeks - How does a host confirm its SLAAC-configured address works on the network?
a. DAD/Neighbor Solicitation
b. Browser check
c. Manual ping only
d. DHCPv6 confirmation
Answer: ageeksforgeeks+1 - Which is a limitation of SLAAC?
a. Cannot assign DNS by default
b. Too much administrative overhead
c. High hardware requirements
d. Not supported on switches
Answer: ageeksforgeeks - What does a host require to autoconfigure using SLAAC?
a. Receiving a valid Router Advertisement
b. Permission from DHCPv6
c. Static prefix in config
d. ARP resolution
Answer: ageeksforgeeks+1 - When a network prefix changes, how do hosts update addresses using SLAAC?
a. Upon receipt of new Router Advertisement
b. Manual reconfiguration
c. After ARP exchange
d. Only after reboot
Answer: ageeksforgeeks - Which of the following is not a feature of SLAAC?
a. Hosts self-configure with no server
b. State stored on DHCP server
c. Uses ICMPv6 for info exchange
d. Capable of address prefix updates
Answer: bipcisco+2