Disclaimer:
Educational Use Only:
The website links provided are to be used strictly for educational and knowledge-gaining purposes only.
No Misuse:
Do not misuse the links or the information contained therein for any commercial, illegal, or unethical activities.
Respect for Websites and Businesses:
Respect the intellectual property and business interests of the websites and their owners. Do not attempt to alter, copy, or redistribute content without proper authorization.
Acknowledge Value of Knowledge:
Recognize and value the knowledge and resources shared by these websites. Use the information responsibly and ethically.
No Endorsement:
The provision of these links does not imply endorsement of the linked sites, their content, or their products and services. Users are responsible for evaluating the suitability and accuracy of the information.
User Responsibility:
By accessing these links, you agree to use the information at your own risk and to comply with all applicable laws and website terms of use.
- Which transmission mode allows data to flow in only one direction?
a. Full-duplex
b. Half-duplex
c. Simplex
d. Bidirectional
Answer: c. Simplexexamradar - What is a classic example of a simplex device?
a. Monitor
b. Keyboard
c. Telephone
d. Repeater
Answer: b. Keyboardexamradar - In which mode can devices both transmit and receive but not simultaneously?
a. Full-duplex
b. Simplex
c. Half-duplex
d. Hybrid
Answer: c. Half-duplexgeeksforgeeks+1 - Walkie-talkie communication uses which duplex mode?
a. Simplex
b. Full-duplex
c. Half-duplex
d. Asymmetric
Answer: c. Half-duplextestbook+1 - Which transmission mode enables simultaneous sending and receiving on both ends?
a. Simplex
b. Half-duplex
c. Serial
d. Full-duplex
Answer: d. Full-duplexgeeksforgeeks+1 - Which is an example of a full-duplex system?
a. Keyboard
b. CB radio
c. Repeater
d. Telephone network
Answer: d. Telephone networklenovo+1 - What does duplex in networking describe?
a. Number of devices connected
b. Data transmission direction
c. Power supply
d. Cable length
Answer: b. Data transmission directionexamradar - Which duplex mode is mainly used in modern Ethernet networks?
a. Half-duplex
b. Full-duplex
c. Simplex
d. Multi-duplex
Answer: b. Full-duplexnotes.networklessons+1 - What is a common issue when one device is set to full-duplex and the other to auto-negotiation?
a. Speed mismatch
b. Duplex mismatch
c. IP address conflict
d. Firmware error
Answer: b. Duplex mismatchvskills+1 - Why do duplex mismatches create errors as network traffic increases?
a. Power overload
b. More collisions occur
c. Cable damage
d. Software bugs
Answer: b. More collisions occurvskills - Which protocol is associated with Ethernet auto-negotiation for speed-duplex settings?
a. TCP
b. CSMA/CD
c. UDP
d. DHCP
Answer: b. CSMA/CDreddit+1 - Which setting on Ethernet devices is recommended for compatibility unless otherwise required?
a. Manual speed and duplex
b. Default auto-negotiation
c. Half-duplex only
d. Simplex only
Answer: b. Default auto-negotiationnotes.networklessons - In half-duplex mode, what happens if two devices try to send data simultaneously?
a. Full throughput
b. Data collision
c. Faster communication
d. Automatic failover
Answer: b. Data collisionreddit+1 - What is a potential result of a duplex mismatch?
a. Improved bandwidth
b. Increased interface errors
c. Better signal-to-noise ratio
d. Stable connections
Answer: b. Increased interface errorsvskills - Which transmission mode divides channel capacity between sending and receiving directions?
a. Simplex
b. Half-duplex
c. Full-duplex
d. Serial
Answer: c. Full-duplexgeeksforgeeks - What is the usual Ethernet speed for Gigabit Ethernet?
a. 10 Mbps
b. 100 Mbps
c. 1 Gbps
d. 10 Gbps
Answer: c. 1 Gbpsnotes.networklessons - How is the aggregate bandwidth of a 100 Mbps full-duplex Ethernet link calculated?
a. 100 Mbps total
b. 200 Mbps (100 send + 100 receive)
c. 50 Mbps total
d. 150 Mbps
Answer: b. 200 Mbps (100 send + 100 receive)oreilly - In what scenario might auto-negotiation default to half-duplex operation?
a. When both devices use full-duplex
b. When one side is manually configured
c. When both sides use simplex
d. When the link is down
Answer: b. When one side is manually configurednotes.networklessons - Which of these can be a sign of a speed-duplex mismatch on a switch port?
a. No LED indication
b. Late collisions and FCS errors
c. Low PoE output
d. Duplicate MAC addresses
Answer: b. Late collisions and FCS errorsvskills - Which duplex mode is typically used for legacy Ethernet (shared hubs)?
a. Full-duplex
b. Half-duplex
c. Simplex
d. Dual-duplex
Answer: b. Half-duplexnotes.networklessons - What does the “speed” setting on an Ethernet port define?
a. Link layer protocol
b. Maximum data rate (bps)
c. IP address assignment
d. Wireless standard
Answer: b. Maximum data rate (bps)notes.networklessons - What was the speed of early Ethernet?
a. 100 Mbps
b. 10 Mbps
c. 1 Gbps
d. 10 Gbps
Answer: b. 10 Mbpsnotes.networklessons - Why is half-duplex operation less efficient than full-duplex?
a. It halves the bandwidth
b. Devices must wait to send/receive
c. Uses more cable
d. More protocols required
Answer: b. Devices must wait to send/receivegeeksforgeeks+1 - Which device typically operates in full-duplex by default?
a. Legacy hub
b. Modern Ethernet switch
c. Thermostat
d. Coax repeater
Answer: b. Modern Ethernet switchnotes.networklessons - What media type is needed for full-duplex Ethernet?
a. Coax cable
b. Point-to-point twisted-pair or fiber
c. Serial cable
d. Infrared link
Answer: b. Point-to-point twisted-pair or fiberoreilly - CSMA/CD is mostly required in which duplex mode?
a. Full-duplex
b. Half-duplex
c. Simplex
d. Serial mode
Answer: b. Half-duplexreddit - When does a “collision domain” exist?
a. Always in full-duplex
b. Only in half-duplex
c. Neither mode
d. Always in simplex
Answer: b. Only in half-duplexreddit+1 - If a network device is set to 1000 Mbps, full-duplex, what is its theoretical max combined throughput?
a. 2000 Mbps
b. 1000 Mbps
c. 500 Mbps
d. 1500 Mbps
Answer: a. 2000 Mbpsoreilly+1 - What should both ends of a link use to avoid duplex misconfiguration?
a. Random settings
b. Both set to auto-negotiation or same manual setting
c. Different standards
d. Variable topology
Answer: b. Both set to auto-negotiation or same manual settingvskills+1 - Which mode typically does NOT experience collisions?
a. Half-duplex
b. Full-duplex
c. Simplex
d. Hybrid mode
Answer: b. Full-duplexcbtnuggets+1 - What’s the downside of forcing a port’s duplex manually when the other end uses auto-negotiation?
a. Faster speed
b. Duplex mismatch risk
c. Increased reliability
d. Simplified configuration
Answer: b. Duplex mismatch riskvskills+1 - What happens in half-duplex if both stations try to transmit at the same time?
a. Both succeed
b. Collision occurs
c. Connection drops
d. Speed increases
Answer: b. Collision occursreddit+1 - What is an example where simplex mode is used?
a. Mouse connection
b. Monitor output
c. Network switch uplink
d. Smartphone audio
Answer: b. Monitor outputscribd+1 - Which protocol helps manage errors in half-duplex Ethernet?
a. ARP
b. CSMA/CD
c. SNMP
d. DHCP
Answer: b. CSMA/CDreddit - Which duplex mode is best for real-time applications like video conferencing?
a. Simplex
b. Half-duplex
c. Full-duplex
d. Serial
Answer: c. Full-duplexlenovo+1 - What normally happens when a switch detects mismatched duplex settings?
a. Automatically fixes the issue
b. Generates interface errors
c. Increases link speed
d. Drops frames
Answer: b. Generates interface errorsvskills - Which standard includes Ethernet full-duplex operation?
a. IEEE 802.3x
b. IEEE 802.11ac
c. IEEE 802.1q
d. IEEE 802.5
Answer: a. IEEE 802.3xoreilly - What duplex setting should be avoided for cable connections between two modern switches?
a. Auto-negotiation
b. Manual full-duplex
c. Manual half-duplex
d. Any consistent setting
Answer: c. Manual half-duplexvskills+1 - Why do most modern NICs use auto-negotiation by default?
a. Simplifies configuration
b. Increases collision rate
c. Forces half-duplex
d. Uses less power
Answer: a. Simplifies configurationnotes.networklessons - What error is likely on the half-duplex end during a mismatch?
a. Alignment errors
b. Speed drop
c. Power surge
d. CSMA errors
Answer: a. Alignment errorsvskills - What error is likely on the full-duplex end during a duplex mismatch?
a. FCS errors
b. Frame loss
c. Routing loop
d. CRC skip
Answer: a. FCS errorsvskills - “Late collision” errors in statistics indicate which issue?
a. Power loss
b. Duplex mismatch
c. OS crash
d. Port security
Answer: b. Duplex mismatchvskills - Which mode is more “expensive” due to cabling needs?
a. Simplex
b. Half-duplex
c. Full-duplex
d. Synchronous
Answer: c. Full-duplexgeeksforgeeks - In full-duplex, which flow control mechanism can prevent buffer overflow?
a. Ping
b. PAUSE frames (MAC control)
c. DHCP request
d. SNMP trap
Answer: b. PAUSE frames (MAC control)oreilly - What should a network engineer check first when seeing many FCS errors on a link?
a. Fiber length
b. Duplex mismatch
c. VLAN assignments
d. Cable shielding
Answer: b. Duplex mismatchvskills - What is a typical result on a network with growing mismatched duplex ports?
a. Increased throughput
b. Rising error rate
c. Enhanced stability
d. No effect
Answer: b. Rising error ratevskills - Which of these statements about full-duplex is correct?
a. It needs shared media for efficiency
b. It eliminates the collision domain
c. It does not support simultaneous transmission
d. It limits cable length
Answer: b. It eliminates the collision domainoreilly+1 - What happens to channel capacity in half-duplex mode?
a. Doubles
b. Is fully utilized in one direction at a time
c. Always shared
d. Split between four devices
Answer: b. Is fully utilized in one direction at a timegeeksforgeeks - In which duplex mode will a station always wait if another is sending?
a. Simplex
b. Half-duplex
c. Full-duplex
d. Hybrid
Answer: b. Half-duplexgeeksforgeeks+1 - What is the function of transmission mode in networking?
a. Sets IP address
b. Defines direction of signal flow
c. Specifies cable length
d. Determines MAC address format
Answer: b. Defines direction of signal flowexamradar
- https://examradar.com/data-communication-transmission-mode-simplex-half-duplex-full-duplex-mcqs/
- https://www.geeksforgeeks.org/computer-networks/transmission-modes-computer-networks/
- https://testbook.com/question-answer/which-is-the-example-of-half-duplex-system–5da2f9b1f60d5d750af7f1f7
- https://www.lenovo.com/us/en/glossary/duplex/
- https://notes.networklessons.com/ethernet-speed-and-duplex-mismatches
- https://www.oreilly.com/library/view/ethernet-the-definitive/1565926609/ch04.html
- https://www.vskills.in/certification/certified-basic-network-support-professional-interface-speed-and-duplex-issues
- https://www.reddit.com/r/networking/comments/r7qbzk/basic_question_about_full_duplex/
- https://www.cbtnuggets.com/blog/communication/half-duplex-vs-full-duplex
- https://www.scribd.com/document/377781095/Objective-Questions-With-Answers
- https://learningnetwork.cisco.com/s/question/0D53i00000Kt2yJCAR/understanding-duplex-and-speed-terminology
- https://www.interviewbit.com/networking-interview-questions/
- https://www.scribd.com/doc/310732454/Questions-Sample
- https://www.mcqsquestions.com/2022/05/computer-network-mcqs-with-answers-set-3.html
- https://study.com/academy/practice/quiz-worksheet-simplex-half-duplex-duplex-communication-channels.html
- https://automationcommunity.com/ethernet-questions-and-answers/
- https://www.sanfoundry.com/computer-fundamentals-questions-answers-transmission-modes/
- https://en.wikipedia.org/wiki/Duplex_(telecommunications)
- https://www.wecreateproblems.com/interview-questions/computer-networking-interview-questions
- https://testbook.com/question-answer/_______-is-an-example-of-full-duplex-system–5f647fc1fe6916348994b0f5