Blog

MCQs

Disclaimer:

Educational Use Only:

The website links provided are to be used strictly for educational and knowledge-gaining purposes only.

No Misuse:

Do not misuse the links or the information contained therein for any commercial, illegal, or unethical activities.

Respect for Websites and Businesses:

Respect the intellectual property and business interests of the websites and their owners. Do not attempt to alter, copy, or redistribute content without proper authorization.

Acknowledge Value of Knowledge:

Recognize and value the knowledge and resources shared by these websites. Use the information responsibly and ethically.

No Endorsement:

The provision of these links does not imply endorsement of the linked sites, their content, or their products and services. Users are responsible for evaluating the suitability and accuracy of the information.

User Responsibility:

By accessing these links, you agree to use the information at your own risk and to comply with all applicable laws and website terms of use.


  1. Which topology forms the basis of modern data center designs to optimize east-west traffic?
    a. Ring
    b. Spine-Leaf
    c. Bus
    d. Star
    Answer: bgeeksforgeeks+2
  2. How many switching layers exist in a spine-leaf architecture?
    a. One
    b. Two
    c. Three
    d. Four
    Answer: btechtarget+2
  3. What is the main function of a spine switch in the architecture?
    a. Connects servers to the outside world
    b. Routes traffic between leaf switches
    c. Transmits data to clients
    d. Filters network packets
    Answer: b9tut+2
  4. In a spine-leaf topology, what do leaf switches connect to?
    a. Only spine switches
    b. Only servers and end devices
    c. Both spine switches and servers/end devices
    d. Only other leaf switches
    Answer: cstudy-ccna+2
  5. How does spine-leaf architecture reduce latency compared to the traditional three-tier approach?
    a. By limiting server connections
    b. By reducing the number of hops
    c. Through increased cable length
    d. By using only Layer 2 devices
    Answer: btrgdatacenters+2
  6. Which scenario best benefits from a spine-leaf architecture?
    a. Small office
    b. Branch office
    c. Large data center
    d. Home network
    Answer: cnetworklessons+2
  7. What is the traffic type optimized in spine-leaf networks?
    a. North-south
    b. East-west
    c. Upstream
    d. Downstream
    Answer: bversitron+2
  8. Which design ensures every leaf switch has equal bandwidth to all other leaf switches?
    a. Hierarchical
    b. Partial mesh
    c. Full mesh between spine and leaf
    d. Star
    Answer: cgeeksforgeeks+2
  9. The spine layer can be described best as:
    a. Access layer
    b. Backbone or core
    c. Distribution layer
    d. Aggregation layer
    Answer: b9tut+2
  10. Which switches handle Layer 3 traffic more commonly in this architecture?
    a. Only leaf switches
    b. Only spine switches
    c. Both spine and leaf
    d. Edge routers
    Answer: blightyear+2
  11. Leaf switches in a spine-leaf network are typically installed at:
    a. Core of data center
    b. Top of rack (ToR)
    c. Backbone layer
    d. Data center perimeter
    Answer: bhpe+2
  12. If one leaf switch fails, what happens to the overall topology connectivity?
    a. All connectivity lost
    b. Only devices connected to failed leaf are affected
    c. Spine switches go down
    d. All leaf switches disconnect
    Answer: bstudy-ccna+2
  13. In a spine-leaf, what type of connections exist between spine switches?
    a. Full mesh
    b. Ring
    c. Star
    d. None
    Answer: dcodilime+2
  14. Which protocol is commonly used to maximize path utilization in spine-leaf?
    a. RIPv2
    b. OSPF single area
    c. ECMP (Equal-Cost Multi-Path)
    d. Spanning Tree
    Answer: cfibermall+2
  15. A primary benefit of adding more spine switches is:
    a. More clients supported
    b. Increases bandwidth between leaf switches
    c. Adds redundancy to edge switches
    d. Segments the network
    Answer: bfibermall+2
  16. In a spine-leaf network, leaf switches connect directly to:
    a. All other leaf switches
    b. Only to end devices
    c. Every spine switch
    d. Aggregation switches
    Answer: cnetworklessons+2
  17. The oversubscription ratio in spine-leaf refers to:
    a. Number of VLANs
    b. Ratio of spine to leaf ports
    c. Bandwidth entering/exiting vs bandwidth between leaf and spine
    d. Number of uplinks per spine
    Answer: cgeeksforgeeks+2
  18. Which of these is NOT a feature of spine-leaf?
    a. Full-mesh leaf-to-spine
    b. Two switching tiers
    c. Hierarchical core
    d. Equal leaf-to-leaf path count
    Answer: clightyear+2
  19. Scalability in spine-leaf is achieved by:
    a. Adding aggregation switches
    b. Adding more leaf and/or spine switches
    c. Reducing the number of ports
    d. Using old hardware
    Answer: btrgdatacenters+2
  20. Which is true of traffic paths in spine-leaf networks?
    a. Variable hop count between leaves
    b. Fixed, predictable hop count
    c. Long, unpredictable routes
    d. Determined by random forwarding
    Answer: btechtarget+2
  21. What happens when a spine switch fails?
    a. Network becomes fully unavailable
    b. Traffic reroutes through remaining spine switches
    c. All leaf switches go offline
    d. End devices disconnect
    Answer: b9tut+2
  22. The main reason for adopting spine-leaf in modern data centers is:
    a. East-west traffic optimization
    b. North-south traffic
    c. Cheaper equipment
    d. Wireless support
    Answer: aversitron+2
  23. The primary analogy for the spine layer in the architecture is:
    a. Branch
    b. Backbone
    c. Leaf
    d. Aggregator
    Answer: bstudy-ccna+2
  24. Which describes the network expansion in spine-leaf?
    a. Complicated and slow
    b. Simple; add leaf/spine switches
    c. Requires replacing core
    d. Needs aggregation redesign
    Answer: btrgdatacenters+2
  25. What topology does spine-leaf directly replace in data centers?
    a. Point-to-point
    b. Three-tier
    c. Mesh
    d. Ring
    Answer: bnetworklessons+2
  26. What is one major limitation of traditional three-tier addressed by spine-leaf?
    a. Lack of redundancy
    b. Aggregation bottleneck
    c. Limited access ports
    d. Unpredictable cabling
    Answer: bfibermall+2
  27. The protocol often used for routing in spine-leaf is:
    a. RIP
    b. BGP
    c. IS-IS
    d. PPP
    Answer: btrgdatacenters+2
  28. Leaf switches typically perform which function?
    a. Backbone routing
    b. End device aggregation
    c. Bandwidth throttling
    d. Storage only
    Answer: blightyear+2
  29. The number of leaf switches supported is primarily defined by:
    a. Number of ports on spine switches
    b. Cable type
    c. IP range
    d. VLAN count
    Answer: aqsfptek+2
  30. How does topology impact network troubleshooting?
    a. Increased complexity
    b. Simplified and predictable fault isolation
    c. No effect
    d. Difficult to monitor
    Answer: blinkedin+2
  31. In a spine-leaf, which devices are never connected directly?
    a. Leaf to leaf
    b. Spine to leaf
    c. End device to leaf
    d. End device to aggregation
    Answer: a9tut+2
  32. Which network traffic travels from one server to another in the same data center?
    a. North-south
    b. East-west
    c. Upstream
    d. Downstream
    Answer: bgeeksforgeeks+2
  33. What is a benefit of equal-cost multipath (ECMP) in spine-leaf?
    a. Single route for all traffic
    b. Efficient load balancing
    c. Increased network loops
    d. Blocking ports
    Answer: bnetworklessons+2
  34. Which is a best practice in designing a scalable spine-leaf layout?
    a. Oversubscribe only the spines
    b. Ensure every leaf connects to all spines
    c. Connect some leaves to all spines
    d. Use just one spine switch
    Answer: bcodilime+2
  35. When expanding the network, what must be added for increased east-west bandwidth?
    a. More end devices
    b. Additional leaf and spine switches
    c. More routers
    d. Rack PDUs
    Answer: btechtarget+2
  36. The main limitation of leaf switches is generally:
    a. Port count
    b. VLANs
    c. Firmware
    d. Fiber connectors
    Answer: aqsfptek+2
  37. How many direct paths exist between any two leaf switches in a typical 4-spine, 8-leaf topology?
    a. One
    b. Two
    c. Four
    d. Eight
    Answer: cgeeksforgeeks+2
  38. Which type of redundancy is naturally provided in spine-leaf design?
    a. Port-channel only
    b. Path redundancy
    c. No redundancy
    d. MPLS
    Answer: bstudy-ccna+2
  39. Which is the correct connection rule?
    a. Spines must connect to all leaves
    b. Leaves must connect to each other
    c. Spines connect to end devices
    d. Leaves do not connect to spines
    Answer: a9tut+2
  40. What allows a spine-leaf network to easily support virtualization and containerization?
    a. Rigid static routing
    b. Flat, predictable traffic patterns
    c. Centralized control
    d. Spanning tree dominance
    Answer: bhpe+2
  41. What traffic bottleneck is greatly reduced by spine-leaf?
    a. Between servers and storage
    b. Aggregation layer
    c. Internet access
    d. WAN links
    Answer: bversitron+2
  42. Which scenario does NOT benefit from spine-leaf topology?
    a. Large-scale data center
    b. Multi-server cloud
    c. Home wireless network
    d. High-performance computing cluster
    Answer: ctechtarget+2
  43. What allows rapid convergence after a failure?
    a. Manual routing only
    b. Pre-calculated multipath options
    c. Single routed path
    d. Static default route
    Answer: bfibermall+2
  44. What network feature enables easy incremental scaling?
    a. Single uplink routing
    b. Modular leaf and spine expansion
    c. Fixed number of ports
    d. VLAN stacking
    Answer: btrgdatacenters+2
  45. What defines the topology as non-blocking?
    a. All devices use STP
    b. Any leaf can communicate with any other with no oversubscription
    c. Bottlenecks at the edge
    d. Fixed bandwidth per port
    Answer: bnetworklessons+2
  46. Why is management simplified in spine-leaf?
    a. Fewer configuration options
    b. Flat topology, uniform device roles
    c. Low number of devices
    d. No redundancy
    Answer: blinkedin+2
  47. Which combination helps spine-leaf provide high availability?
    a. Dual uplink per leaf
    b. Multiple spine switches and ECMP
    c. VLAN pruning
    d. Centralized hub
    Answer: bfibermall+2
  48. In what kind of deployment is Layer 3 used most in spine-leaf?
    a. Wireless mesh
    b. Enterprise WAN
    c. Large-scale data centers needing rapid failover
    d. Single server connection
    Answer: cgeeksforgeeks+2
  49. Which characteristic makes troubleshooting easier in spine-leaf?
    a. Fixed hop count and deterministic traffic paths
    b. Lack of documentation
    c. No redundancy
    d. Varying topologies
    Answer: alinkedin+2
  50. Adding new leaf switches impacts the existing topology by:
    a. Reducing performance
    b. Requiring no major change to existing links
    c. Disconnecting spines
    d. Causing topology loops
    Answer: blightyear+2

 

  1. https://www.geeksforgeeks.org/computer-networks/spine-leaf-architecture/
  2. https://www.9tut.com/spine-leaf-architecture-tutorial
  3. https://networklessons.com/cisco/ccna-200-301/spine-and-leaf-architecture
  4. https://www.techtarget.com/searchdatacenter/definition/Leaf-spine
  5. https://lightyear.ai/tips/what-is-a-spine-leaf-architecture
  6. https://study-ccna.com/spine-and-leaf-architecture/
  7. https://www.trgdatacenters.com/resource/spine-and-leaf-network-architecture/
  8. https://www.fibermall.com/blog/spine-leaf-vs-traditional-three-tier.htm
  9. https://www.hpe.com/in/en/what-is/spine-leaf-architecture.html
  10. https://www.versitron.com/pages/spine-leaf-architecture-vs-three-tier-architecture-analyzed-and-compared
  11. https://www.qsfptek.com/qt-news/what-is-spine-leaf-architecture-and-how-does-it-work.html
  12. https://codilime.com/blog/spine-leaf-vs-traditional-dcs/
  13. https://www.linkedin.com/posts/shafei-gad-01b53245_network-scalability-architecture-activity-7213555568509145088-GTHd
  14. https://www.tutorialspoint.com/software-defined-networking/quiz_on_software-defined-networking-leaf-spine-fabrics.htm
  15. https://networkwalks.com/network-topologies-architectures-online-quiz/
  16. https://www.networkacademy.io/ccna/network-fundamentals/leaf-spine-architecture
  17. https://www.reddit.com/r/networking/comments/8fwocs/spine_and_leaf_architecture_questions/
  18. https://www.exam-labs.com/blog/category/leaf-spine-network-architecture
  19. https://stordis.com/spine-leaf-vs-traditional-data-center-architectures/
  20. https://www.techtarget.com/searchdatacenter/quiz/Test-yourself-on-modern-data-center-networking-architecture

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!