Disclaimer:
Educational Use Only:
The website links provided are to be used strictly for educational and knowledge-gaining purposes only.
No Misuse:
Do not misuse the links or the information contained therein for any commercial, illegal, or unethical activities.
Respect for Websites and Businesses:
Respect the intellectual property and business interests of the websites and their owners. Do not attempt to alter, copy, or redistribute content without proper authorization.
Acknowledge Value of Knowledge:
Recognize and value the knowledge and resources shared by these websites. Use the information responsibly and ethically.
No Endorsement:
The provision of these links does not imply endorsement of the linked sites, their content, or their products and services. Users are responsible for evaluating the suitability and accuracy of the information.
User Responsibility:
By accessing these links, you agree to use the information at your own risk and to comply with all applicable laws and website terms of use.
- Throughput in networking refers to which of the following?
a. The total number of packets a network can theoretically carry
b. The actual rate at which data is successfully transmitted in a network
c. The total delay experienced by a packet in the network
d. The maximum data rate supported by a protocol
Answer: b. The actual rate at which data is successfully transmitted in a networkwayground+1 - Which unit is typically used to measure throughput?
a. Seconds
b. Joules
c. Bits per second (bps)
d. Hertz
Answer: c. Bits per second (bps)zenarmor - What is the difference between bandwidth and throughput?
a. Bandwidth measures actual data delivered, throughput is the theoretical maximum
b. Throughput is the process delay, bandwidth is the collision domain
c. Bandwidth is the theoretical maximum data rate, throughput is the actual data rate achieved
d. They are essentially the same
Answer: c. Bandwidth is the theoretical maximum data rate, throughput is the actual data rate achieveddnsstuff+1 - High throughput in a network generally indicates which of the following?
a. Significant packet loss
b. Efficient data transmission
c. High latency
d. Network congestion
Answer: b. Efficient data transmissionzenarmor - Which factor does NOT affect throughput in a computer network?
a. Protocol overhead
b. Available bandwidth
c. Distance between hosts
d. File system format
Answer: d. File system formatwayground+1 - The formula for network throughput is:
a. (Packet size × Number of packets)
b. Data size divided by transmission time
c. Transmission delay divided by propagation delay
d. Queue length multiplied by arrival rate
Answer: b. Data size divided by transmission timezenarmor - If a 2,000 byte file is transmitted in 4 seconds, what is the throughput in bits per second?
a. 4,000 bps
b. 500 bps
c. 2,000 bps
d. 16,000 bps
Answer: a. 4,000 bpszenarmor - Which of the following most directly decreases throughput on a network?
a. Increasing packet size
b. Reducing protocol overhead
c. Experiencing high packet loss
d. Using faster hardware
Answer: c. Experiencing high packet losszenarmor - A bottleneck link in the network determines:
a. Throughput
b. Propagation speed
c. Jitter
d. Routing
Answer: a. Throughputsanfoundry - Which network scenario describes high throughput but poor latency?
a. Many successful data exchanges with rapid responses
b. Many successful data exchanges with slow responses
c. Few successful data exchanges with rapid responses
d. Few errors but high delays in delivery
Answer: b. Many successful data exchanges with slow responseszenarmor - Throughput is considered a measure of:
a. Network efficiency
b. Network complexity
c. Logical topology
d. Physical distance
Answer: a. Network efficiencyzenarmor - In pure ALOHA networking, the maximum throughput is approximately:
a. 18%
b. 36%
c. 50%
d. 74%
Answer: a. 18%sanfoundry+1 - Which scenario illustrates maximum throughput?
a. No data transmitted
b. All frames are lost
c. All data frames are delivered successfully
d. Half the frames are delivered
Answer: c. All data frames are delivered successfullyzenarmor - What major impact does network congestion have on throughput?
a. It increases throughput
b. It has no effect on throughput
c. It decreases throughput
d. It makes throughput infinite
Answer: c. It decreases throughputzenarmor - If a system sends 10,000 bytes in 20 seconds, what is the throughput in bits per second?
a. 4,000 bps
b. 5,000 bps
c. 400 bps
d. 8,000 bps
Answer: a. 4,000 bpszenarmor - In a network, which term describes the maximum data transfer rate, regardless of transmission efficiency?
a. Latency
b. Throughput
c. Bandwidth
d. Jitter
Answer: c. Bandwidthdnsstuff+1 - Which protocol’s throughput decline is most sensitive to packet loss?
a. UDP
b. TCP
c. ICMP
d. IGMP
Answer: b. TCPzenarmor - What is the effect of retransmission on throughput?
a. Increases throughput
b. Decreases throughput
c. No effect
d. Can increase or decrease
Answer: b. Decreases throughputzenarmor - For a network with a bandwidth of 100 Mbps operating at a throughput of 40 Mbps, what percent of the available bandwidth is being used?
a. 10%
b. 40%
c. 60%
d. 100%
Answer: b. 40%dnsstuff - Which of the following mainly causes throughput to be less than bandwidth?
a. Network delays
b. Data encryption
c. Protocol overhead and retransmissions
d. Fiber optic cables
Answer: c. Protocol overhead and retransmissionsdnsstuff+1 - An application sends 10 MB in 10 seconds. What is the throughput?
a. 1.0 MBps
b. 10 MBps
c. 100 MBps
d. 0.1 MBps
Answer: a. 1.0 MBpszenarmor - If a protocol’s header introduces a 20% overhead, and the bandwidth is 10 Mbps, what is the best possible throughput?
a. 2 Mbps
b. 8 Mbps
c. 10 Mbps
d. 12 Mbps
Answer: b. 8 Mbpsdnsstuff - Which type of network topology might show variable throughput depending on central hub performance?
a. Mesh
b. Ring
c. Bus
d. Star
Answer: d. Starzenarmor - In networking, what is ‘goodput’?
a. Difference between theoretical and actual throughput
b. Application-level throughput excluding protocol overhead
c. Maximum error rate tolerated
d. Minimum throughput required
Answer: b. Application-level throughput excluding protocol overheadzenarmor - Throughput can be increased by:
a. Increasing errors
b. Increasing bandwidth and reducing retransmissions
c. Increasing distance
d. Increasing latency
Answer: b. Increasing bandwidth and reducing retransmissionsdnsstuff+1 - Which of the following metrics is most useful when evaluating cloud service performance?
a. Color
b. Throughput
c. OS version
d. Routing protocol
Answer: b. Throughputzenarmor - Which network action will NOT typically improve throughput?
a. Upgrading cables
b. Reducing noise
c. Increasing packet size to maximum transmission unit (MTU)
d. Introducing more devices
Answer: d. Introducing more deviceszenarmor - What is the key difference between latency and throughput?
a. Latency is a measure of data delivered, throughput is delay
b. Throughput is a measure of data delivered per unit time, latency is the time taken for data to travel from source to destination
c. Both mean the same
d. Neither is used in networking
Answer: b. Throughput is a measure of data delivered per unit time, latency is the time taken for data to travel from source to destinationstudy+1 - Jitter’s impact on throughput is most visible in which scenarios?
a. Bulk file transfer
b. Real-time voice/video
c. Firmware upgrade
d. IPv6 migration
Answer: b. Real-time voice/videozenarmor - The presence of acknowledgements increases throughput in which protocol, provided there is no loss?
a. TCP
b. UDP
c. ARP
d. DNS
Answer: a. TCPzenarmor - What is indicated if measured throughput is consistently below expected bandwidth?
a. No issues
b. Packet loss, congestion, or protocol inefficiencies
c. Unlimited network access
d. Direct fiber connection
Answer: b. Packet loss, congestion, or protocol inefficienciesdnsstuff+1 - A network has 1 Gbps bandwidth and experiences 40% packet drop. What is the maximum possible throughput?
a. 400 Mbps
b. 600 Mbps
c. 1 Gbps
d. 1.4 Gbps
Answer: b. 600 Mbpszenarmor - Which is a sign of high throughput?
a. Fast file downloads
b. Long ping times
c. Frequent timeouts
d. Unstable VoIP
Answer: a. Fast file downloadszenarmor - What causes throughput to drop as more devices connect to a shared medium?
a. More data links
b. Collisions and contention
c. New topology
d. Packet slicing
Answer: b. Collisions and contentionzenarmor - Throughput in a wireless network is typically:
a. Lower than bandwidth due to interference
b. Equal to bandwidth
c. Measured by CPU speed
d. Unaffected by hardware
Answer: a. Lower than bandwidth due to interferencezenarmor - In stop-and-wait ARQ, the throughput is primarily limited by
a. Window size
b. Round-trip time
c. Buffer size
d. Number of hops
Answer: b. Round-trip timetestbook - Which layer is responsible for throughput optimization in TCP/IP model?
a. Application
b. Presentation
c. Transport
d. Data Link
Answer: c. Transportzenarmor - An increase in queue length at a router indicates what effect on throughput?
a. Higher throughput
b. Lower throughput
c. No change
d. Improved fairness
Answer: b. Lower throughputzenarmor - In pure ALOHA, if the system generates 1000 frames/sec, what is approximate successful throughput?
a. 135 frames/sec
b. 870 frames/sec
c. 970 frames/sec
d. 300 frames/sec
Answer: a. 135 frames/secsanfoundry - If end-to-end network delay is high, what happens to throughput?
a. It increases
b. It decreases
c. It remains constant
d. It fluctuates
Answer: b. It decreasessanfoundry - What does utilization refer to when discussing throughput?
a. Ratio of throughput to bandwidth
b. Ratio of queuing delay to total time
c. Actual distance used
d. Window size
Answer: a. Ratio of throughput to bandwidthdnsstuff+1 - In a sliding window protocol, larger window sizes generally
a. Decrease throughput
b. Do not affect throughput
c. Increase throughput
d. Make throughput infinite
Answer: c. Increase throughputtestbook - What limits throughput on an Ethernet segment with many collisions?
a. Protocol header length
b. Collision domain size
c. Device processor speed
d. ARP cache
Answer: b. Collision domain sizezenarmor - A 10 Mbps link transmits a 1000 byte packet. Transmission time is:
a. 0.8 ms
b. 1.2 ms
c. 0.1 ms
d. 0.4 ms
Answer: a. 0.8 mssanfoundry - The best method to observe changes in throughput is to
a. Measure bandwidth
b. Use network monitoring tools to track data sent and received per second
c. Observe cable type
d. Check DNS table
Answer: b. Use network monitoring tools to track data sent and received per secondzenarmor - What does ‘aggregate throughput’ mean?
a. Total throughput of a single connection
b. Combined throughput of all connections on the network
c. Minimum throughput value
d. Theoretical bandwidth only
Answer: b. Combined throughput of all connections on the networkzenarmor - If data transfer takes twice as long as expected, the measured throughput is
a. Half the expected
b. Double the expected
c. Unchanged
d. Four times the expected
Answer: a. Half the expectedzenarmor - A throughput test using a specific file size and time required to transfer it yields
a. Theoretical bandwidth
b. Actual throughput
c. Delay variation
d. Jitter
Answer: b. Actual throughputdnsstuff+1 - Which factor generally does NOT influence throughput?
a. Network congestion
b. Transmission medium quality
c. Number of colors on a webpage
d. Protocol efficiency
Answer: c. Number of colors on a webpagezenarmor - What is an indicator of optimal throughput in a network?
a. Frequent connection drops
b. Stable and high data rates with minimal retransmissions
c. Long packet latency
d. Excessive overhead
Answer: b. Stable and high data rates with minimal retransmissionszenarmor
- https://wayground.com/admin/quiz/65b9b600255b633c2e87254b/networks-bandwidth-throughput-and-latency
- https://www.zenarmor.com/docs/network-basics/what-is-network-throughput
- https://www.dnsstuff.com/network-throughput-bandwidth
- https://www.sanfoundry.com/computer-networks-mcqs-delays-loss/
- https://www.sanfoundry.com/tricky-network-security-questions-answers/
- https://www.geeksforgeeks.org/questions/consider-a-network-using-the-pure-aloha-medium-access/
- https://study.com/academy/practice/quiz-worksheet-comparing-throughput-latency.html
- https://testbook.com/question-answer/the-maximum-achievable-throughput-is–63e4fddbacea6943b36fdb1b
- https://www.geeksforgeeks.org/quizzes/50-computer-networks-mcqs-with-answers/
- https://study.com/academy/practice/quiz-worksheet-comparing-bandwidth-throughput.html
- https://testbook.com/objective-questions/mcq-on-transmission-bandwidth–5eea6a0f39140f30f369e61f
- https://www.sanfoundry.com/computer-network-questions-answers/
- https://www.gdcramban.in/MCQ/networkmcq.pdf
- https://www.youtube.com/watch?v=vLgY4uxhqJI
- https://purplegriffon.com/quizzes/comptia-network+-quiz-questions-and-answers
- https://www.interviewbit.com/computer-network-mcq/
- https://reck.ac.in/wp-content/uploads/2023/04/DCN_MCQ-Ashwini-.pdf
- https://wayground.com/admin/quiz/5e81d5ae1372a7001b78d707/network-bandwidth
- https://mockrounds.com/cs_fundamentals/essential-network-performance-metrics-latency-jitter-and-throughput-quiz/