Disclaimer:
Educational Use Only:
The website links provided are to be used strictly for educational and knowledge-gaining purposes only.
No Misuse:
Do not misuse the links or the information contained therein for any commercial, illegal, or unethical activities.
Respect for Websites and Businesses:
Respect the intellectual property and business interests of the websites and their owners. Do not attempt to alter, copy, or redistribute content without proper authorization.
Acknowledge Value of Knowledge:
Recognize and value the knowledge and resources shared by these websites. Use the information responsibly and ethically.
No Endorsement:
The provision of these links does not imply endorsement of the linked sites, their content, or their products and services. Users are responsible for evaluating the suitability and accuracy of the information.
User Responsibility:
By accessing these links, you agree to use the information at your own risk and to comply with all applicable laws and website terms of use.
- What is static routing?
a. Routing controlled manually by a network administrator
b. Routing decided by routing protocols
c. Routing based on network traffic analysis
d. Routing using dynamic path discovery
Answer: a. Routing controlled manually by a network administratornetworkwalks - What command syntax is used to configure a static route on a Cisco router?
a. ip route <destination network> <subnet mask> <next-hop IP or exit interface>
b. route add <destination> <gateway>
c. static route <network> <mask> <gateway>
d. set route <destination network> <gateway>
Answer: a. ip route <destination network> <subnet mask> <next-hop IP or exit interface>networkwalks - What is the administrative distance of a static route by default?
a. 1
b. 90
c. 120
d. 255
Answer: a. 1networkwalks - Which type of static route matches all packets and is also called the default gateway?
a. Default static route
b. Summary static route
c. Floating static route
d. Host static route
Answer: a. Default static routenetworkwalks - What does the command “ip route 0.0.0.0 0.0.0.0 192.168.1.1” do?
a. Configures a default route sending all unknown packets to 192.168.1.1
b. Adds a static route to network 0.0.0.0
c. Specifies a static route to localhost
d. Deletes the default route
Answer: a. Configures a default route sending all unknown packets to 192.168.1.1itexamanswers - Which two pieces of information are mandatory to specify when configuring a static route?
a. Destination network and next-hop IP or exit interface
b. Source IP address and subnet mask
c. Routing protocol and administrative distance
d. Router hostname and interface number
Answer: a. Destination network and next-hop IP or exit interfacenetworkwalks - What happens if you configure a static route with an incorrect next-hop IP address?
a. Traffic destined for the network will not be forwarded correctly
b. The router automatically corrects the IP address
c. The static route is ignored and dynamic routes are used
d. The router sends an alert to the network admin
Answer: a. Traffic destined for the network will not be forwarded correctlyitexamanswers - What is a floating static route?
a. A backup static route with a higher administrative distance
b. A route that automatically adjusts to the best path
c. A static route that floats between two interfaces
d. A route configured without an exit interface
Answer: a. A backup static route with a higher administrative distancenetworkwalks - Why would you configure a floating static route?
a. To provide a backup path if the primary route fails
b. To load balance network traffic
c. To increase bandwidth
d. To provide dynamic routing capabilities
Answer: a. To provide a backup path if the primary route failsnetworkwalks - What is the default metric of a static route?
a. 0
b. 1
c. 100
d. 255
Answer: a. 0networkwalks - When multiple routes to the same destination exist, which route will be preferred by the router?
a. The route with the lowest administrative distance
b. The route learned last
c. The route with the highest metric
d. The default route always
Answer: a. The route with the lowest administrative distancenetworkwalks - How does a router learn about remote networks in static routing?
a. Manually via static route configuration
b. By broadcasting routing updates
c. Through dynamic routing protocols
d. Automatically through ARP
Answer: a. Manually via static route configurationwayground - What is the disadvantage of static routing?
a. Not scalable for large networks
b. Uses high CPU resources
c. Introduces routing loops
d. Automatically updates routes
Answer: a. Not scalable for large networksnetworkwalks - Which command will verify the static route configuration on a Cisco router?
a. show ip route
b. show interface
c. show running-config
d. show neighbors
Answer: a. show ip routecomputernetworkingnotes - What is a static host route?
a. A static route to a single IP address
b. A route automatically learned by the router
c. A route that floats dynamically
d. A route to the default gateway
Answer: a. A static route to a single IP addressnetworkwalks - Which two parameters can be specified to create a fully specified static route?
a. Next-hop IP and exit interface
b. Destination IP and subnet mask
c. Administrative distance and metric
d. Source IP and next-hop MAC
Answer: a. Next-hop IP and exit interfaceitexamanswers - What is the recommended administrative distance for a floating static route?
a. Higher than the dynamic routing protocol’s administrative distance
b. Lowest possible value
c. Equal to the dynamic routing protocol distance
d. 0
Answer: a. Higher than the dynamic routing protocol’s administrative distanceitexamanswers - Which command syntax is incorrect for static route configuration?
a. ip static route 192.168.1.0 255.255.255.0 10.1.1.1
b. ip route 192.168.1.0 255.255.255.0 10.1.1.1
c. ip route 172.16.0.0 255.255.0.0 Serial0/0
d. ip route 10.0.0.0 255.0.0.0 GigabitEthernet0/1
Answer: a. ip static route 192.168.1.0 255.255.255.0 10.1.1.1networkwalks - What is the purpose of the gateway of last resort in static routing?
a. To forward packets when no other routes match
b. To provide load balancing
c. To control broadcast forwarding
d. To authenticate routing updates
Answer: a. To forward packets when no other routes matchnetworkwalks - If you configure two static routes to the same destination network but with different next hops, what technique can be configured for load balancing?
a. Equal-cost static routes
b. Floating static routes
c. Default static route
d. Host static route
Answer: a. Equal-cost static routesnetworkwalks - What does a recursive static route do?
a. Uses a next-hop IP address that requires additional resolution to reach
b. Specifies the exit interface only
c. Uses a default route only
d. Is automatically generated
Answer: a. Uses a next-hop IP address that requires additional resolution to reachitexamanswers - What type of static route uses only the exit interface?
a. Directly connected static route
b. Host route
c. Floating static route
d. Default route
Answer: a. Directly connected static routeitexamanswers - What is the main difference between static routing and dynamic routing?
a. Static routing requires manual configuration; dynamic routing automatically learns routes
b. Static routing always uses the default route; dynamic routing does not
c. Static routing is faster than dynamic routing
d. Dynamic routing uses a single path only
Answer: a. Static routing requires manual configuration; dynamic routing automatically learns routesinterviewplus - What is the effect of removing a static route from the routing table?
a. The router no longer forwards packets to that destination through the removed route
b. The router will automatically find a new path
c. All traffic is dropped immediately
d. The route is converted to a dynamic route
Answer: a. The router no longer forwards packets to that destination through the removed routenetworkwalks - How can a network administrator ensure a static route is used only as a backup and not preferred?
a. By setting a higher administrative distance for that route
b. By configuring the route without a subnet mask
c. By using a higher metric value
d. By disabling the route
Answer: a. By setting a higher administrative distance for that routenetworkwalks - Which command would display all configured static routes and their administrative distances?
a. show ip route static
b. show running-config
c. show interfaces
d. show ip protocols
Answer: a. show ip route staticcomputernetworkingnotes - What does the “ip route 192.168.10.0 255.255.255.0 10.10.10.2 5” command indicate?
a. A static route with an administrative distance of 5
b. A default static route
c. A host route to 10.10.10.2
d. A dynamic route update
Answer: a. A static route with an administrative distance of 5itexamanswers - Why would a static route be preferred over a dynamic route?
a. Because static routes have lower administrative distance by default
b. Because dynamic routes use less CPU
c. Because static routes automatically adapt to topology changes
d. Because dynamic routes cannot be configured on Cisco routers
Answer: a. Because static routes have lower administrative distance by defaultnetworkwalks - When configuring static routes, what is the effect of specifying an exit interface instead of a next-hop IP?
a. It sends packets directly out the specified interface
b. It sends packets to the next-hop router via IP
c. It disables routing on that interface
d. It configures a host route
Answer: a. It sends packets directly out the specified interfaceitexamanswers - What is a summary static route?
a. A route that represents multiple networks with a single entry
b. A floating static route
c. A host route
d. A default route
Answer: a. A route that represents multiple networks with a single entrynetworkwalks - What is generally required to verify the operational status of a static route?
a. Using ping and traceroute commands to test connectivity
b. Restarting the router
c. Checking interface status only
d. Running DHCP configurations
Answer: a. Using ping and traceroute commands to test connectivitycomputernetworkingnotes - What is the impact of network topology changes on static routes?
a. Static routes do not change automatically and require manual updating
b. Static routes automatically adjust to changes
c. Static routes delete themselves automatically on topology changes
d. Static routes convert to dynamic routes
Answer: a. Static routes do not change automatically and require manual updatingnetworkwalks - Which of the following is FALSE about static routing?
a. It requires manual configuration of routes
b. It typically scales well in very large networks
c. It is secure since routes aren’t advertised
d. It has low overhead on CPU and bandwidth
Answer: b. It typically scales well in very large networksnetworkwalks - How does static routing affect routing table size?
a. It keeps routing tables small since only configured routes are present
b. It increases routing table size significantly
c. It removes all dynamic routes automatically
d. It duplicates network entries in the table
Answer: a. It keeps routing tables small since only configured routes are presentnetworkwalks - What command removes a static route from a Cisco router?
a. no ip route <destination network> <subnet mask> <next-hop IP or exit interface>
b. delete static-route <destination network>
c. remove route <destination network>
d. clear ip route static
Answer: a. no ip route <destination network> <subnet mask> <next-hop IP or exit interface>computernetworkingnotes - What is the role of subnet mask in static route configuration?
a. To define the size of the destination network
b. To specify the order of static routes
c. To define the router’s IP address
d. To set interface bandwidth
Answer: a. To define the size of the destination networknetworkwalks - What command would show the detailed routing table including static routes?
a. show ip route
b. show interfaces
c. show protocols
d. show version
Answer: a. show ip routecomputernetworkingnotes - What is the key benefit of static routing in terms of security?
a. Routes are manually configured and not advertised, reducing attack surfaces
b. Static routing automatically encrypts packets
c. Static routing blocks all external traffic
d. Static routing integrates firewall features
Answer: a. Routes are manually configured and not advertised, reducing attack surfacesnetworkwalks - In a small network with only a few routers, which routing method is most suitable?
a. Static routing
b. Dynamic routing
c. Hybrid routing
d. Default routing
Answer: a. Static routingnetworkwalks - What does the term “next-hop” mean in static routing?
a. The IP address or interface where packets are forwarded next
b. The final destination IP address
c. The source IP address of packets
d. The router management IP address
Answer: a. The IP address or interface where packets are forwarded nextnetworkwalks - What happens when a static route points to an inactive interface?
a. Traffic will be dropped because the route is unreachable
b. The router reroutes automatically
c. The router switches to dynamic routing
d. The interface is reactivated automatically
Answer: a. Traffic will be dropped because the route is unreachablenetworkwalks - Which type of static route is specified using the “ip route” command with a destination IP and subnet mask of 255.255.255.255?
a. Host route
b. Default route
c. Floating route
d. Summary route
Answer: a. Host routenetworkwalks - In Cisco routers, which command would you use to set a static route with a backup route that has a higher administrative distance?
a. ip route <network> <mask> <next-hop> <higher AD>
b. ip static route backup <network> <mask> <next-hop>
c. ip route backup <network> <mask> <next-hop>
d. static route set backup <network> <mask> <next-hop>
Answer: a. ip route <network> <mask> <next-hop> <higher AD>computernetworkingnotes - What is the meaning of “recursive lookup” in static routing?
a. When the router looks up the next-hop IP address in the routing table to find the exit interface
b. When the router updates routes automatically via recursion
c. When static routes are dynamically learned from neighbors
d. When routes are floating and recursive
Answer: a. When the router looks up the next-hop IP address in the routing table to find the exit interfaceitexamanswers - Can by default static routes participate in load balancing on Cisco routers?
a. Yes, if multiple static routes with equal cost exist
b. No, static routes never load balance
c. Only when specified by advanced commands
d. Only with dynamic routing protocols
Answer: a. Yes, if multiple static routes with equal cost existnetworkwalks - Which of the following static routes is used to handle all traffic directed to any unspecified destination?
a. Default static route
b. Host static route
c. Floating static route
d. Summary static route
Answer: a. Default static routenetworkwalks - What is the effect of configuring a static route with a next hop of 0.0.0.0?
a. It acts as a default route matching all packets
b. It disables routing on that destination
c. It specifies a host route
d. It causes network failure
Answer: a. It acts as a default route matching all packetsnetworkwalks - What command would configure a static route to network 192.168.2.0 with next hop 10.0.0.2?
a. ip route 192.168.2.0 255.255.255.0 10.0.0.2
b. ip route 10.0.0.2 255.255.255.0 192.168.2.0
c. static route add 192.168.2.0 mask 255.255.255.0 10.0.0.2
d. route add 192.168.2.0 10.0.0.2
Answer: a. ip route 192.168.2.0 255.255.255.0 10.0.0.2networkwalks - Why is static routing considered easy to implement for small networks?
a. Because there are few routes and manual updates are manageable
b. Because static routing requires no CLI knowledge
c. Because it provides automatic failover
d. Because it integrates with cloud platforms
Answer: a. Because there are few routes and manual updates are manageablenetworkwalks - Which feature is NOT provided by static routing?
a. Automatic route discovery
b. Control over routing paths
c. Low routing overhead
d. Increased network security through manual route configuration
Answer: a. Automatic route discoverynetworkwalks
- https://networkwalks.com/static-default-routing-interview-questions/
- https://itexamanswers.net/15-6-4-module-quiz-ip-static-routing-answers.html
- https://wayground.com/admin/quiz/5e71ce47c0c4ec001c7a6c63/static-routing
- https://www.computernetworkingnotes.com/ccna-study-guide/static-routing-configuration-guide-with-examples.html
- https://www.interviewplus.ai/network-and-system-administration/static-and-dynamic-routing/questions
- https://ipcisco.com/quiz/static-routes/
- https://testbook.com/objective-questions/mcq-on-router-and-routing-algorithm–5eea6a0939140f30f369d914
- https://www.watelectronics.com/mcq/routing-algorithm/
- https://www.sanfoundry.com/computer-networks-questions-answers-routers-functionalities-basics/
- https://www.thebryantadvantage.com/videos-and-tutorials/ccna-and-ccent-practice-exams/static-routes-1/
- https://www.examveda.com/networking/practice-mcq-question-on-ip-routing/
- https://ccnatutorials.in/multiple-choice-questions/mcq-for-ip-routing-set-1/
- https://wayground.com/admin/quiz/5d2bce03504efd001b4c1ae2/chapter-11-static-dynamic-routing-protocols
- https://itexamanswers.net/2-8-1-packet-tracer-basic-static-route-configuration-answers.html
- https://www.grabstudy.com/Technical-MCQs/IP-Routing.php
- https://www.geeksforgeeks.org/computer-networks/implementation-of-static-routing-in-cisco-2-router-connections/
- https://www.imedita.com/blog/routing-interview-questions/
- https://www.quiz-maker.com/cp-hs-static-routing-mastery
- https://www.youtube.com/watch?v=xpKQTdFxFrI