MCQs

Disclaimer:

Educational Use Only:

The website links provided are to be used strictly for educational and knowledge-gaining purposes only.

No Misuse:

Do not misuse the links or the information contained therein for any commercial, illegal, or unethical activities.

Respect for Websites and Businesses:

Respect the intellectual property and business interests of the websites and their owners. Do not attempt to alter, copy, or redistribute content without proper authorization.

Acknowledge Value of Knowledge:

Recognize and value the knowledge and resources shared by these websites. Use the information responsibly and ethically.

No Endorsement:

The provision of these links does not imply endorsement of the linked sites, their content, or their products and services. Users are responsible for evaluating the suitability and accuracy of the information.

User Responsibility:

By accessing these links, you agree to use the information at your own risk and to comply with all applicable laws and website terms of use.

What does channel utilization measure in networking?
a. The percentage of time a channel is occupied
b. The total number of devices on a channel
c. The data transfer rate of a channel
d. The available bandwidth of a channel
Answer: ainfo.huawei
In Wi-Fi, what is typically considered a threshold for good user experience regarding channel utilization?
a. Above 90%
b. Below 60%
c. Exactly 75%
d. Above 80%
Answer: binfo.huawei
High channel utilization in Wi-Fi networks can result in which outcome?
a. Increased throughput
b. Network congestion
c. Zero packet loss
d. Improved latency
Answer: binfo.huawei
Channel utilization is calculated using which type of metric?
a. Data rate to throughput ratio
b. Channel busy time divided by measurement period
c. Signal-to-noise ratio
d. Packet error rate
Answer: binfo.huawei
Which of the following is not included in the calculation of Wi-Fi channel utilization?
a. Transmit time
b. Receive time
c. Busy time
d. Device MAC address
Answer: dplasma-cloud
What does a 100% channel utilization indicate?
a. Channel is optimally used
b. Channel is fully congested
c. Minimum interference
d. No traffic detected
Answer: breddit
If the channel utilization is too low, what can it signify for resource usage?
a. Efficient resource usage
b. Underutilized network resources
c. Maximum congestion
d. Overloaded AP
Answer: binfo.huawei
Which protocol is mentioned as impacting channel utilization by causing back-off on collision?
a. TCP/IP
b. CSMA/CA
c. ARP
d. DHCP
Answer: breddit
What metric expresses the ratio of actual data throughput to channel capacity?
a. Channel Mixing
b. Channel Utilization
c. Channel Spreading
d. Channel Allocation
Answer: binet.omnetpp
In IEEE 802.11 Wi-Fi, the busy channel time also counts time from which type of signals?
a. Valid user data signals only
b. Interference signals
c. Beacon frames only
d. Probe requests only
Answer: binfo.huawei
What network device usually measures channel utilization in WLANs?
a. Client devices
b. Switches
c. Access Points
d. Firewalls
Answer: cinfo.huawei
Poor channel planning typically results in what change to channel utilization?
a. Decreases channel utilization
b. Has no effect
c. Increases channel utilization
d. Stabilizes throughput
Answer: cyoutube
If multiple neighboring APs use the same channel, what occurs?
a. Co-channel interference
b. Increased throughput
c. Better coverage
d. Lower utilization
Answer: ayoutube
What value does channel utilization range between?
a. 1-100
b. 0-1
c. 0-255
d. 1-10
Answer: binet.omnetpp
Beacons sent by APs impact which networking metric?
a. Channel utilization
b. Network latency
c. Signal-to-noise ratio
d. Packet error rate
Answer: ayoutube
What type of network design aims to keep channel utilization at optimal levels?
a. Static channel planning
b. Dynamic channel planning
c. Manual interference planning
d. Fixed IP address assignment
Answer: bekahau
Which assignment strategy allows borrowing channels from neighboring cells?
a. Fixed channel assignment
b. Dynamic channel assignment
c. Borrowing strategy
d. Static assignment
Answer: csanfoundry+1
In dynamic channel assignment, who allocates the channel to a cell?
a. The base station itself
b. The client device
c. The Mobile Switching Center (MSC)
d. Neighboring AP
Answer: csanfoundry
What is the drawback of dynamic channel assignment?
a. Decreased channel utilization
b. Increased probability of blocked calls
c. Increased computational load
d. Lower overall throughput
Answer: cscribd+1
Which network environment is more susceptible to high channel utilization issues?
a. Rural
b. Dense urban deployments
c. Satellite
d. Point-to-point
Answer: byoutube
Which factor most influences channel utilization in Wi-Fi environments?
a. SSID selection
b. Channel width
c. MAC address filtering
d. DHCP server settings
Answer: byoutube
What effect does increasing the number of Wi-Fi clients on the same channel have?
a. More efficient data transfer
b. Higher chance of collisions
c. Lower latency
d. Stronger signal strength
Answer: breddit
Channel utilization can be used to monitor what kind of network performance?
a. Only wired networks
b. Both wired and wireless networks
c. Only satellite links
d. Only cloud networks
Answer: binet.omnetpp
Channel utilization statistic is typically observed over which period?
a. Last 0.1 seconds or last 100 packets
b. Last 10 minutes only
c. Only during system boot
d. Only during AP initialization
Answer: ainet.omnetpp
Increasing channel utilization beyond 80% often leads to what impact?
a. Smooth performance
b. Network queuing and delay
c. Improved SNR
d. Increased storage speed
Answer: binfo.huawei
Which of the following is used to approximate throughput in channel utilization measurements?
a. Source packet length
b. IO local port number
c. Channel transmission interval
d. Network protocol version
Answer: cinet.omnetpp
On an Ethernet network, which interface property directly impacts channel utilization?
a. Bitrate
b. MAC address
c. DNS server
d. Firmware version
Answer: ainet.omnetpp
Which of the following does NOT directly affect channel utilization?
a. Channel width
b. Number of clients
c. DHCP scope
d. Co-channel interference
Answer: cyoutubeinfo.huawei
Which protocol uses listen-before-transmit mechanism, affecting channel utilization?
a. CSMA/CD
b. ARP
c. IPsec
d. SNMP
Answer: ayoutube
In wireless networks, what is a main contributor to increasing channel utilization besides user data?
a. Probe requests
b. VLAN tagging
c. MAC filtering
d. Burst transmission
Answer: ayoutube
Which type of multiplexing affects channel utilization?
a. TDM (Time Division Multiplexing)
b. FDM (Frequency Division Multiplexing)
c. CDM (Code Division Multiplexing)
d. All of the above
Answer: dexamradar+1
An overloaded access point will show which channel utilization value range?
a. 0-10%
b. 10-30%
c. 60-100%
d. 40-60%
Answer: cplasma-cloud+1
Channel utilization can help diagnose which wireless problem?
a. Hardware compatibility issues
b. Interference and congestion
c. Outdated firmware
d. Broken cables
Answer: byoutubecisco+1
In which frequency band is it often harder to find an unused channel?
a. 2.4 GHz
b. 5 GHz
c. 60 GHz
d. 1.8 GHz
Answer: ayoutube
Which elements are typically displayed in a channel utilization trend chart?
a. Percentage utilization over time
b. Number of DHCP leases
c. Authentication logs
d. Device firmware version
Answer: aarubanetworking.hpe
Channel utilization is most critical for which type of applications?
a. Latency-sensitive applications
b. Bulk backup
c. Offline storage
d. Archived files
Answer: ainfo.huawei
An increase in which measurement directly raises channel utilization?
a. Idle time
b. Busy time
c. Packet error rate
d. ACK time
Answer: bplasma-cloud
Channel utilization is used by network engineers to do what?
a. Monitor overall network health
b. Plan resource allocation
c. Troubleshoot congestion
d. All of the above
Answer: dcisco+1youtube
Channel utilization is not a “higher-is-better” metric because:
a. It must be minimized for good user experience
b. High utilization can cause latency and network congestion
c. It is always optimal above 90%
d. It reflects only idle time
Answer: binfo.huawei
During periods of network contention, channel utilization often shows:
a. Rapid spikes
b. Consistent flat lines
c. No change from baseline
d. Decreased throughput
Answer: aarubanetworking.hpe
For proper channel utilization analysis, which simulator tool is useful?
a. INET with OMNeT++
b. Wireshark only
c. iperf3 only
d. VMware
Answer: ainet.omnetpp
In wireless simulation, the measured utilization expresses usage for:
a. All network devices combined
b. Each pair of interfaces separately
c. Routers only
d. Internet backbone
Answer: binet.omnetpp
Channel utilization below 60% typically results in:
a. Good user experience
b. Severe congestion
c. High packet loss
d. Inefficient spectrum usage
Answer: ainfo.huawei
Which kind of network can experience channel utilization bottlenecks due to beacon frames?
a. Wi-Fi networks
b. Wired Ethernet networks
c. Optical fiber networks
d. MPLS backbone networks
Answer: ayoutube+1
Dynamic adjustment of channel width is intended to:
a. Optimize channel utilization
b. Increase interference
c. Allow static allocation
d. Reduce security risks
Answer: aekahau
Channel utilization impacts which of the following most directly?
a. Throughput and latency
b. Routing table size
c. Firewall rules
d. Encryption method
Answer: asciencedirect+1
In a given measurement, how is utilization expressed numerically?
a. As a fraction or percentage
b. As an access point count
c. As a MAC address range
d. As bandwidth in MB/s
Answer: aplasma-cloud+1
Which situation can artificially inflate channel utilization values?
a. Environmental interference
b. Device firmware update
c. VLAN hopping
d. Network address translation
Answer: aplasma-cloud+1
What is a best practice for maintaining optimal channel utilization?
a. Regularly scan for congested channels
b. Decrease AP transmit power
c. Disable dynamic frequency selection
d. Use only static IP addresses
Answer: aekahauyoutube
In channel utilization reporting, which of the following are primary factors included?
a. Transmit, receive, busy, and idle time
b. VLAN ID, channel number, device name
c. Route metric, firmware version, log files
d. Authentication, encryption, power level
Answer: aplasma-cloud+1

Blog

Systemethic Technologies

Leave a Reply Cancel reply

Useful links

Other Terms & Policies

Contact Info